Inventory Details & Specifications for 28ft Weldcraft 260 Cuddy King

Weldcraft 260 Cuddy King*SOLD*

Status: Used
Length: 28ft
Year: 2012
Item Number: WCD01740K112

Description & Standard Equipment:

In excellent condition comfort fishing boat - with new paint and new trailer.

Twin 225 Mercury Verados - only 367/362 hrs

Length (including bracket): 8.5m / 28 Ft. LOA,
Beam: 2.6 m / 102 inches,
Sides: 101.6cm x 4.06mm /40 inch x .160 inch (5086-H116),
Bottom: 243.84cm x 6.35mm / 96 inch x.250 inch (5086-H116) w/Reverse Chine
Deadrise: Transom-19 Deg, Forward-26 Deg, Bow-39 Deg. (see picture to the right)
Dry Weight: 2131.9kg / 4700lbs
Fuel: 458.0 L / 121 USG diurnal fuel system
Max HP Rating: 373kw / 500 HP
Colors: Blue Cabin, Half-side and Transom paint

• Full hard top w/ forward leaning windows, grab handles, Alaskan bulkhead, and 3 inch full length top grab rails.
• Cuddy cabin with evacuation hatch, side windows, storage, cushions and 2 cabin lights
• Swept bow with rails and self-draining anchor rope locker
• Self-draining aft deck w/ .190 inch metal flooring and non-skid coating
• 30 inch standard w/ option for 25 inch Offshore bracket with integral bottom sheet and full width swim platform
• Full reverse chine bottom design
• Transom bait box w/ split cutting board lid
• Extruded side/bottom chine w/formed toe rail and keel strip
• Aft sub-floor fish box with self-draining lid and macerator pump
• Cabin sub-floor storage
• Port console with storage
• Heavy duty welded bow eye & stern eyes
• 7 - 8 inch welded cleats
• Pressure tested sub-floor fuel cell - diurnal system compliant
• Sound deadening foam package
• Choice of standard zolatone w/clearcoat colors on cabin sides, top, windshield, Alaskan bulkhead, interior sidewalls and side storage trays
• Non-skid deck and gunwale paint
• Vinyl side graphics
• Zinc anodes
• Stainless steel thru-hull fittings below water line w/ seacock valves
• Cabin lights
• Driver and Passenger pantograph windshield wipers
• Stainless steel Marine horn
• Outboard dash panel w/fuel gauge, tachometer w/hour meter, volt meter, trim tab controls, 12v outlet and USB port
• Navigation and anchor lights
• Courtesy floor lights in cabin
• Electric trim tabs on brackets
• 3-1250 gph bilge pumps w/auto float switch and 1 high water bilge alarm
• Washdown kit and holder
• Dual battery switch w/ battery boots (no batteries included)
• Fuel water separator
• Choice of sand or gray interior package
• Silver Steer hydraulic steering
• Carpeted cabin sidewalls
• Rod holders
• AJR glass package including 2 piece fixed windshield, sliding side windows w/ screens, rear bulkhead windows, V-birth side windows & lockable sliding bulk head door
• Mariner suspension seats w/ swivels on aluminum risers and foot rests
• 47inch bench storage seats w/access doors
• Transom access panels
• Cup holders • Side tray rod racks • Marine grade plywood floors with vinyl floor covering in cabin • Gunwale side tray access step/seats with grab handles • Dual side trays w/drains

Engines, Trailer & Navigation System:
Main Motor: 2012 - Mercury Verado 225XL - 367 hrs
Twin Motor: 2012 - Mercury Verado 225CXL - 362 hrs
Trailer: Double Axle Road Runner 8,500#
Navigation System: Lowrance HDS10 at the main station / HDS8 at rear station

Additional Equipment:
• Electric head in the v-berth
• Dinette and a suspension on port side
• Galley with stove and ice box starboard
• Bench seat and suspension seat
• Lowrance HDS10 at the main station
• Lowrance HDS 8 at the aft station
• 3G radar
• Windlass
• Espar heater
• 2 Electric Scotty Downriggers


Alberni Power & Marine, Rod’s Power & Marine Ltd. amd Alberni Industrial Marine Supply Ltd., to be referred as RPM Group is not responsible for, and expressly disclaims all liability for, damages of any kind arising out of use, reference to, or reliance on any information contained within the website. While the information contained within the site is periodically updated no guarantee is given that the information provided in this website is correct, complete, and up-to-date.

Product information is based on material received from suppliers. RPM Group is very eager to provide to all clients a verification of its website content.

Request More Info Print Page