Request More Info
Interested in the 2019 Mercury 200XL V-6 4-Stroke SeaPro?
Featured Inventory
View Details
300 HP Mercury 300XL V-8 4-Stroke DTS
New 2019 Program
MSRP: $34,669.00 - Get 24% off MSRP / $8,330.00
Go with 5 Years Factory Backed Limited Coverage
Purchase this Mercury outboard model and get a total of 5 years of Mercury factory-backed limited coverage!
In addition to the standard 3-year warranty, you will also receive a 2-year Mercury Product Protection Gold plan!
ALL NEW V-8 4.6L 4-STROKE MODEL
Designed to be reliable, powerfull and efficient!
The new Mercury V-8 FourStrokes are precision engineered from skeg to cowl.
Packed with advanced technology to improve all aspects of performance and reliability, the robust V-8 4.6-liter engines - designed to minimize weight and maximize torque - deliver Mercury’s best-ever FourStroke hole shot, top speed and fuel efficiency.
The new FourStrokes also provide remarkably effective dampening of sound and vibration for a superior boating experience, and Idle Charge battery-management prevents boaters from draining their batteries while operating multiple electronic devices.
The new V-8 boasts class-leading displacement but is the lightest engine in the 300hp class by more than 10 pounds.
Quick-revving double-overhead camshaft design and deep-breathing intake deliver thrilling and satisfying performance.
Great for aluminum console, deck, inflatable rigid hull, inshore fishing, offshore fishing, and runabout boats and tritoons.
Measurements / Performance:
• HP / KW: 300 / 224
• Shaft Length: 25in
• Engine Type: V-8
• Displacement: 279 CID (4.6L)
• Cylinder Configuration: V8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
• Bore and stroke: 3.6" x 3.4" / 92 mm x 86 mm
• Full throttle RPM: 5200 - 6000
• Gearcase ratio: 1.75:1
• Gearcase options: 5.44"
• Dry weight *Lightest model available: 527 lbs / 239 kgs
• Air induction: Performance-Tuned Long-Runner Intake Manifold
• Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
• CARB star rating: 3 Stars - Ultra Low Emission
• Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
Handling/Operating:
• Engine protection operator warning system: SmartCraft Engine Guardian
• Starting: Electric Start with SmartStart Protection
• Controls: DTS Digital Throttle & Shift - DTS Compatible
• Gear shift: F-N-R
• Steering: Hydraulic
• Cooling system: Water-cooled with thermostat
• Trim system: Power trim and tilt
• Maximum Trim Range: 20° (-6° to 14°)
• Maximum Tilt Range: 73° (-6° to 67°)
• Exhaust system: Through prop
• Ignition: SmartCraft PCM 112 Digital Inductive
• Lubrication system: Integrated wet sump
Maintenance/Service:
• Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
• Recommended oil: NMMA Certified FCW SAE 10W-30
• Oil Capacity: 7.0 Quarts / 6.6 Liters
Color Options:
• Phantom Black (generally in stock)
• Cold Fusion White (built to order)
• Pearl Fusion White (built to order)
• Warm Fusion White (built to order)
Panel Color Options:
• Graphite Grey (available at short notice)
• Cold Fusion White (available at short notice)
• Pearl Fusion White (available at short notice)
• Warm Fusion White (available at short notice)
RPM Group Re-Powering Services - contact us for a qoute!
Professional Offshore Experiences also for private Customers:
You will benefit from our 20 years of re-powering experience on your boat - the same as we do for professional heavy users, such as Commercial Fishermen, Whale Watching Tour Operators, Fishing Charters and Sports Fishermen too - on extreme Vancouver Island Westcoast conditions – day by day!
Total Cost of Ownership (TCO) focused Re-Powering:
We design re-powering to accommodate your individual requirements while keeping the engine configurations sustainable, so that your engine RPM stays mainly in the middle range while retaining an excellent boat performance – with optimized configuration of HP, Propeller, Pitch to your boat measurements. This ensures the most economical operating cost for your individual boat specifications and style of boating.
General Services:
• Pre Delivery Inspection - PDI*
• Water Testing - 100% ready for operation*
• Attractive shipping rates
For shipping in Canada, please call for freight quote!
*included, if engine gets picked up in Tofino or Port Alberni.
View Details
200 HP Mercury 200XL V-6 4-Stroke SeaPro
New 2019 Program
SeaPro - the right partner for the job!
MSRP: $25,064.00 - Get 31.6%* off MSRP / $7,925.00*
*Price and discount is for Commcerial Applications only
For Commercial Applications only:
• Engineered to last much longer as its regular counterpart!
• Unlimited hours within 2 Years limited standard warranty
ALL NEW V6 3.4L 4-STROKE SEAPRO MODEL
SeaPro - more power for the job
The new Mercury V-6 SeaPro outboard models bring more of everything to the job - more displacement, more power, more efficiency and more durability.
The impressive muscle of our new V-6 3.4-liter powerheads is specifically designed for commercial duty and delivers our best-ever fuel economy.
The combination of ample torque and low weight makes these engines ideal for heavily-loaded boats. Guaranteed to do its job, so you can do yours.
SeaPro Features
Commercial calibration allows the engine to reach maximum torque well below peak rpm - more power with less stress on the motor, making it the perfect motor for commercial fishing vessels, commercial workboats and law-enforcement boats.
Measurements / Performance:
• HP / KW: 200 / 149
• Shaft Length: 25in
• Engine Type: V-6
• MidSection: Conventional MidSection
• Displacement: 209 CID (3.4L)
• Cylinder Configuration: V6 [64 degree] with Dual Overhead Cam [DOHC] and 24-valves
• Full throttle RPM: 4600 - 5400
• Gearcase ratio: 1.85:1
• Gearcase options: 5.44"
• Dry weight *Lightest model available: 483 lbs / 220 kgs
• Air induction: Performance-Tuned Long-Runner Intake Manifold
• Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
• CARB star rating: 3 Stars - Ultra Low Emission
• Alternator amp / Watt: 85-amp (1071 Watt) with Idle Charge
• Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
Handling/Operating:
• Engine protection operator warning system: SmartCraft Engine Guardian
• Compatible with SmartCraft digital technology: Yes
• Starting: Electric Start with SmartStart Protection
• Controls: Remote Mechanical
• Steering: Big Tiller (optional), Hydraulic (standard), Power (optional)
• Cooling system: Water-cooled with thermostat
• Gear shift: F-N-R
• Trim system: Power trim and tilt
• Maximum Trim Range: 20° (-6° to 14°)
• Maximum Tilt Range: 73° (-6° to 67°)
• Exhaust system: Through prop
• Ignition: SmartCraft PCM 112 Digital Inductive
• Lubrication system: Integrated wet sump
Maintenance/Service:
• Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
• Recommended oil: NMMA Certified FCW SAE 25W-40 (Optional 10W-30 for Cold Conditions)
• Oil Capacity: 7.0 Quarts / 6.6 Liters
Warranty:
• 2 year limited warranty standard on all SeaPro FourStroke models - commercial applications only - UNLIMITED HOURS!
• 2 year corrosion warranty standard on all SeaPro FourStroke models - commercial applications only
RPM Group Re-Powering Services - contact us for a qoute!
Professional Offshore Experiences also for private Customers:
You will benefit from our 20 years of re-powering experience on your boat - the same as we do for professional heavy users, such as Commercial Fishermen, Whale Watching Tour Operators, Fishing Charters and Sports Fishermen too - on extreme Vancouver Island Westcoast conditions – day by day!
Total Cost of Ownership (TCO) focused Re-Powering:
We design re-powering to accommodate your individual requirements while keeping the engine configurations sustainable, so that your engine RPM stays mainly in the middle range while retaining an excellent boat performance – with optimized configuration of HP, Propeller, Pitch to your boat measurements. This ensures the most economical operating cost for your individual boat specifications and style of boating.
General Services:
• Pre Delivery Inspection - PDI*
• Water Testing - 100% ready for operation*
• Attractive shipping rates
For shipping in Canada, please call for freight quote!
*included, if engine gets picked up in Tofino or Port Alberni.
View Details
225 HP Mercury 225XL V-6 4-Stroke DTS
New 2019 Program
MSRP: $29,909.00 - Get 24% off MSRP / $7,180.00
Go with 5 Years Factory Backed Limited Coverage
Purchase this Mercury outboard model and get a total of 5 years of Mercury factory-backed limited coverage!
In addition to the standard 3-year warranty, you will also receive a 2-year Mercury Product Protection Gold plan!
ALL NEW V-6 3.4L 4-STROKE MODEL
INNOVATIVE FEATURES
START FASTER
The new Mercury FourStroke delivers incredible hole shot to get you moving faster and fishing sooner – and the thrill of having your hat blown off now and then.
Get on Plane Fast
At 3.4L, the new Mercury V-6 FourStroke boasts ample displacement in the 175-225hp range. Greater displacement means less work to produce more horsepower and torque, which results in greater acceleration.
Lightest Weight
Lower engine weight means higher power-to-weight ratio, enhanced performance, and better fuel efficiency.
Performance-inspired Configuration
The FourStroke’s four-valve, dual overhead cam design delivers greater acceleration.
Advanced Hydrodynamics
The FourStroke’s gearcase is designed to reduce drag and deliver more stable high-speed performance.
Optimized Mount Packages
Engine mount package is fine-tuned to achieve peak performance without sacrificing a smooth and quiet ride. Mercury engineers spent countless hours dampening sound and dialing in the configuration of the mount packages to create the optimal balance between performance and vibration.
LIGHT AND MIGHTY
Mercury FourStrokes provide premium power and torque in a lightweight package for better maneuverability, greater acceleration, and maximum exhilaration. And you'll love the fuel economy!
Lightest Weight
Every component has been engineered to meet stringent standards at the absolute minimum weight, making the 3.4L V-6 FourStroke the lightest outboard in its class by more than 10 pounds.
26-inch Mounting Centers
The FourStroke’s narrow, 64-degree bank angle and single-point cowl latch system enable tighter fit to the engine block. The extremely compact engine makes multi-engine installations feasible on a broader range of boats.
GO FARTHER
With superior “cruise” fuel economy, Mercury FourStroke engines take you farther, allow you to stay out longer, and have more fun on the water without spending a fortune on fuel. And isn't that what boating is all about?
Advanced Range Optimization (ARO) and closed-loop fuel control
Work together to adjust the fuel mixture and deliver the best possible fuel efficiency.
Advanced Lubrication System
Optimized bearing sizes and oil flows minimize friction and oil temperature to help the engine operate more efficiently.
Drive System
Optimized hydrodynamic shapes minimize drag and increase fuel economy.
Specifications:
• Shaft Length: 25in
• Starting: Smart Start Electric
• Controls: DTS Digital Throttle & Shift - DTS Compatible
• Power Trim & Tilt
• Fuel System: Electronic Fuel Injection (EFI)
• SmartCraft compatible
• Engine Type: V-6
• WOT RPM: 5200-6000
• Displacement: 209 CID (3.4L)
• Induction: 24-valves, DOHC
• Gear Ratio: 1.85:1
• Alternator: 85 amp (1071 watt)
• Dry Weight*: 475 lbs (215kg) *lightest available model
• Steering: Hydraulic (Standard base color), Power (options)
• Color options*: Phantom Black(current RPM Group model), Pearl Fusion White, Warm Fusion White, Cold Fusion White *White paint only available on 200 and 225 FourStroke models
RPM Group Re-Powering Services - contact us for a qoute!
Professional Offshore Experiences also for private Customers:
You will benefit from our 20 years of re-powering experience on your boat - the same as we do for professional heavy users, such as Commercial Fishermen, Whale Watching Tour Operators, Fishing Charters and Sports Fishermen too - on extreme Vancouver Island Westcoast conditions – day by day!
Total Cost of Ownership (TCO) focused Re-Powering:
We design re-powering to accommodate your individual requirements while keeping the engine configurations sustainable, so that your engine RPM stays mainly in the middle range while retaining an excellent boat performance – with optimized configuration of HP, Propeller, Pitch to your boat measurements. This ensures the most economical operating cost for your individual boat specifications and style of boating.
General Services:
• Pre Delivery Inspection - PDI*
• Water Testing - 100% ready for operation*
• Attractive shipping rates
For shipping in Canada, please call for freight quote!
*included, if engine gets picked up in Tofino or Port Alberni.
View Details
25.5ft Rogue Boatworks Coastal 23 HT Outboard Model
Rogue Boatworks Coastal 23 Hard Top
Key Features:
• Fully Welded Seams - No Stitch Welded Hull - 40% more Strength and Integrity
• Bottom, Support Girders, Sides & Transom - 5086 Marine Aluminum Alloy
• Powder Coated and Baked twice at 420° - 3 times more corrosion & impact resistant than painted boats
• Proven by Law Enforcement & Government Customers
• Fully Welded D-Tube Customized Aluminum Trailer - no heavy I-Beams made of steel
5 Reasons why Rogue Jet Boats are more expensive & higher quality:
(1)The Impact of Fully Welded Seams in the Hull
There is no stitch welding in the hull all seams are fully welded resulting in about 25 to 30% more labour and 10 to 12 lbs more welding wire when welding the hull together.
Stitch/Skip welded boats loose 40% to 50% of their strength and integrity
Boats that run in rough seas with large or short interval waves are prone to cracking those stitch welds.
The open/not welded areas between the welds is where the flexing and cracking starts.
These areas are all hidden below the floor where most owners don't inspect with limited access, an area.
(2) Stronger Marine Alloy on all Parts
Rogue uses the more expensive, salt water corrosion resistant and 40% stronger 5086 Aluminum on the hull, sides, transom and box girders unlike other manufacturers who only use 5086 on the bottom and the cheaper/weaker 5052 on the sides, transom and box girders.
Rogue uses 1/4" and 3/8" plate in their transom and pod deck others use 1/8" and 3/16" at best.
(3) A Baked Finish - 3 times more resistent
The baked powder coat finish on a Rogue is 3 times more corrosion and impact resistant then painted boats and twice as durable.
The boat goes into the oven twice and gets the powder coat baked on and then a clear coat over top. The finish is the same under the gunnels, dash, seat boxes, fish and floor boxes as well as all visual areas on the top side of the boat.
(4) Rogue Trailers: Long Life Beauties
Rogue makes their own fully welded custom D-tube trailers. Customized for each boat which cost about twice as much.
They are not like the cheap aluminum I-beam trailers or steel galvanized trailers that other manufactures put under their boats.
Nothing is bolted.
The fenders are solid and fully welded. They have torsion axles, disc brakes, oversize radial tires and LED lights. The trailers go all the way to the back of the boat with full welded steps and welded side guides. The trailer on a Rogue is always way over capacity needed to make sure it has a long life.
(5) Less Maintenance Costs
The high durability of Rogue Boats in general, will keep your total cost of ownership low in the long term and the renewal of a 3M Heavy Duty Vinyl Wrap and not the decal material for the exterior sides, would cost you only 10% of a usual new painting.
The Rogue Trailers are equiped with Vault oil bath hubs - No Inspection - No Maintenance - No Service required.
The Coastal Outboard Series are designed to handle the rough stuff
Built extra deep and wide with extra freeboard , these outboard powered Deep Vees from Rogue have been designed for the roughest conditions on rivers, lakes, bays and the ocean.
Safety in high sides (36") and the extra wide bottom (78") for more stability makes the "Coastal" one of the safest and most seaworthy all welded aluminum boats in the industry.
The progressive deadrise of the boats bottom - from 50 degrees at the bow to 18 degrees at the transom - makes for a smooth ride in choppy seas.
Specifications:
• Hull Length: 23' (Upgrade + 1')
• Hull Length overall (Bracket and Transom included, without Outboard): 25.5'
• Beam: 102"
• Side Height: 36"
• Bottom Width: 78"
• Deadrise: 50º Bow / Transom 18º
• Fuel Capacity: 80 Gallon (Upgrade + 10 Gallons)
• Standard Power
• 4 Lifting/Turning strakes
• Side Thickness: 0.125"
• Bottom Thickness: 0.250"
• Transom Thickness: 0.250"
• Box Girder Thickness: 0.160"
Standard Features:
• Extended outboard bracket-full width
• Carpeted Interior Sides and dash
• Heavy duty .250" bottom and .250" transom
• 5086 Marine Alloy at Sides, Bottom, Transom, Decks and Support Girders
• One color or two tone paint
• 2 Panoramic Windshield Wipers
• Welded Downrigger Mounts (2)
• Navigation Lights
• Dual Marine batteries + Switch
• 2 Bilge Pumps and Auto Awitch 1,100 gph
• Non slip grip Steering Wheel
• Locking Glove Box with Grab Handle
• Water Separator
• Full width Transom Fish Box
• 12 Volt Power Point
• Bow Rope Guide with Jam Cleat
• 5 welded Cleats (8 inch)
• Welded Railing bow and stern
• Diamond Plate (step deck, trim, fore deck)
• Bow Storage Compartment
• Zinc Anode on Transom
• Anchor Door in Bow Step Deck 23"X26"
• Horn
• Transducer Bracket
• 4 heavy duty Lifting/Turning strakes
• Paint all diamond plate
• Extended additional Rod Grippers above Side Trays
• Full Fill from port side by Windshield
• Additional Transom Storage under Transom Fish Box
• Floor board cut outs at Transom for Draining Debris
• Outboard Bracket
• Switch Panel for Accessories, Wipers, Horn, Bilge Pump
View Details
300 HP Mercury 300XXL V-8 Verado Warm Fusion
New 2019 Program
MSRP: $38,750.00 - Get 24% off MSRP / $9,301.00
Go with 5 Years Factory Backed Limited Coverage
Purchase this Mercury outboard model and get a total of 5 years of Mercury factory-backed limited coverage!
In addition to the standard 3-year warranty, you will also receive a 2-year Mercury Product Protection Gold plan!
ALL NEW V8 4.6L VERADO 4-STROKE MODEL
Verado® – a smooth operator
Mercury Verado is the pinnacle of superior outboard design and performance. Created to power the largest boats for the boldest adventures, Verado delivers advanced engineering and refined operation to boat owners who don’t compromise; every feature is designed to offer the ultimate on-water experience and greatest confidence.
Our new 4.6-liter V-8 250 and 300hp outboards deliver exhilarating acceleration and top speed to run offshore with confidence. They boast generous displacement and a robust design that provide uncompromising durability and reliability. The Mercury-exclusive Advanced MidSection (AMS) and under-cowl noise management features of the 250, 300 and 350hp Verado set the standard for smooth, quiet marine propulsion.
The smooth, refined power of a 4.6-liter V-8 powerhead delivers exhilarating acceleration and top speed to run offshore with confidence, with generous displacement and robust design that provide uncompromising durability and reliability. The Mercury exclusive Advanced MidSection (AMS) and under-cowl noise management features set the standard for smooth, quiet marine propulsion
Engine Details
Measurements / Performance:
• HP / KW: 300 / 224
• Shaft Length: 30in
• Engine Type: V-8
• MidSection: Advanced MidSection (AMS)
• Displacement: 279 CID (4.6L)
• Cylinder Configuration: V8 [64 degree] with Dual Overhead Cam [DOHC] and 32-valves
• Bore and stroke: 3.6 in x 3.4 in / 92 mm x 86 mm
• Full throttle RPM: 5200 - 6000
• Air induction: Performance-Tuned Long-Runner Intake Manifold
• Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
• Gearcase ratio: 1.75:1 or 1.85:1
• Gearcase options: 5.44"
• Dry weight *Lightest model available: 600 lbs / 272 kgs
• Air induction: Performance-Tuned Long-Runner Intake Manifold
• Fuel induction system: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
• CARB star rating: 3 Stars - Ultra Low Emission
• Alternator amp / Watt: 115-amp (1449 Watt) with Idle Charge
Handling/Operating:
• Engine protection operator warning system: SmartCraft Engine Guardian
• Compatible with SmartCraft digital technology: Yes
• Starting: Electric Start with SmartStart Protection
• Controls: Digital Throttle & Shift (DTS)
• Steering: Electro-hydraulic power steering / Joystick Piloting for Outboards
• Cooling system: Water-cooled with thermostat
• Gear shift: F-N-R
• Trim system: Power trim and tilt
• Maximum Trim Range: 20° (-6° to 14°)
• Maximum Tilt Range: 73° (-6° to 67°)
• Exhaust system: Through prop
• Ignition: SmartCraft PCM 112 Digital Inductive
• Lubrication system: Integrated wet sump
Maintenance/Service:
• Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
• Recommended oil: NMMA Certified FCW SAE 10W-30
• Oil Capacity: 7.0 Quarts / 6.6 Liters
Color Options:
• Phantom Black (generally in stock)
• Cold Fusion White (built to order)
• Pearl Fusion White (built to order)
• Warm Fusion White (built to order)
Panel Color Options:
• Graphite Grey (available at short notice)
• Cold Fusion White (available at short notice)
• Pearl Fusion White (available at short notice)
• Warm Fusion White (available at short notice)
RPM Group Re-Powering Services - contact us for a qoute!
Professional Offshore Experiences also for private Customers:
You will benefit from our 20 years of re-powering experience on your boat - the same as we do for professional heavy users, such as Commercial Fishermen, Whale Watching Tour Operators, Fishing Charters and Sports Fishermen too - on extreme Vancouver Island Westcoast conditions – day by day!
Total Cost of Ownership (TCO) focused Re-Powering:
We design re-powering to accommodate your individual requirements while keeping the engine configurations sustainable, so that your engine RPM stays mainly in the middle range while retaining an excellent boat performance – with optimized configuration of HP, Propeller, Pitch to your boat measurements. This ensures the most economical operating cost for your individual boat specifications and style of boating.
General Services:
• Pre Delivery Inspection - PDI*
• Water Testing - 100% ready for operation*
• Attractive shipping rates
For shipping in Canada, please call for freight quote!
*included, if engine gets picked up in Tofino or Port Alberni.
View Details
18ft 9in Crestliner 1850 Commander Elite Silver-Met./Blck.
1850 Commmander Elite - Bad weather only proves how durable it is!
The Crestliner Commander Elite 1850 is tough enough to stand up to whatever Mother Nature throws at it. Bad weather, big waves; this resilient fishing boat’s all-welded aluminum hull can take the beating and keep moving towards your favorite fishing spot.
The Commander Elite 1850 offers a full slate of fishing features like ample rod and livewell storage, SeaStar hydraulic steering and a bow step-up box that allows easy bow access while providing more storage space.
For open water fishing, there’s simply no comparison to the Commander Elite 1850.
Colour: Silver Metallic base w/Black Metallic accent & Gray interior
Measurements:
• Hull Length: 18' 9"
• Hull Length w/SST: 19' 7"
• Boat/Motor/Trailer Length: 21' 6"
• Boat/Motor/Trailer Width: 8' 6"
• Boat/Motor/Trailer Height: 7' 4"
• Beam: 94"
• Chine Width: 78"
• Side Depth: 33"
• Max Depth: 44"
• Max Cockpit Depth: 30"
• Transom Height: 25"
• Deadrise: 17º
• Weight (Boat only, dry): 1,620#
• Max Weight Capacity: 1,900#
• Max Person Capacity: 6
• Min HP Capacity: 90
• Max HP Capacity: 150
• Fuel Capacity: 33 gal.
• Aluminum Gauge Bottom: 0.125"
• Aluminum Gauge Sides: 0.090"
• Aluminum Gauge Transom: 0.125"
• Cockpit Length: 133"
• Max. cockpit width: 71"
Key Features
Ultra Tough All-Welded Windshield
Take control of the elements thanks to a fully sealed walk-through windshield, step up storage box, a durable all-aluminum console and optional wipers to keep the water at bay.
Diamond Plate Bow
Durable diamond plating is welded to the bow for a fully sealed deck that includes 3 heavy-duty aluminum cleats, a livewell and bow drain holes that are positioned on each side of deck floor to allow for easy drainage.
All-Aluminum Console
The tough, all-aluminum console features speedometer, tachometer, trim and fuel gauges, large flat surface for mounting electronics, toggle switches and a 12V power outlet. (Shown with upgraded aluminum polished steering wheel)
Bow Livewell
Keep your catch fresh all day with a 22-Gallon aerated livewell in the bow.
Space Saving Transom
Enjoy more room to fish at the back of the boat with the Space Saving Transom. Additionally, it features a fully enclosed, removable storage drawer that can be placed on the stern non-skid pad to be used as a cutting board for bait.
SureMount Gunnel Accessory System
Removable SureMount aluminum accessory brackets lets you slide your favorite accessories along the gunnel for perfect placement without drilling.
In-Floor Rod Locker
Center locking in-floor rod locker has 6 tubes at 7'6"capacity so you can be prepared for when the bite is on.
Under Gunnel Rod Racks
Starboard and portside under-gunnel rod racks are easily accessed to stow rods. Each rack accommodates up to four 9'6" rods.
Console/Instrumentation
• Console, starboard, toggle switches, 12V power outlet & throw tray
• Console, port, lockable glove box
• Windshield, Ultra tough all-welded
• Speedometer, tachometer & trim gauges, chrome standard w/pre-rig
• Steering wheel, black sport w/comfort grip
• Hydraulic steering
• Tilt steering
• Master power switch
Flooring
• Vinyl floor, cockpit & stern w/treated panel flooring (Limited Lifetime Warranty)
• Seat slider, helm
Seating
• Seat, Deluxe w/fixed pedestal bases (2)
• Aluminum floor, diamond plate (bow)
Storage/Convenience
• Bow step w/storage
• Storage, open (under port & starboard consoles)
• Storage compartment, battery/oil (stern)
• Storage drawer/cutting station, removable (starboard, stern)
• Drink holders (2)
Rod Storage
• Rod storage, lockable (center, in floor) (6 tubes @ 7'6" capacity)
• Rod storage, open (port & starboard) (4 rod tubes per side @ 9'6" capacity)
Livewells/Baitwells
• Livewell, 22 gal. areated (bow) (36Lx16Wx8.75D)
Interior Features
• Diamond plate bow, fully sealed
• Bow drain holes (2)
• Bilge pump (automatic)
• Lanyard, ignition stop switch
• Light, navigation
• Lights, courtesy
Exterior Features
• Keel, extruded full length, welded (center)
• Transom, wood-free
• Reverse chine extrusion, welded full length w/spray deflector
• Gunnel, extruded w/SureMount & J-Hook systems (cockpit & stern)
• Gunnel step pads (non-skid)
• Paint process, baked Armor-Guard
• Rub rail
• Cleats, aluminum (5)
• Reboarding ladder w/transom handle
• Eyes, stainless steel (bow & stern)
Accessories
• SureMount accessory mounting bracket (1)
