Request More Info
Interested in the 2020 Mercury 9.9ELH Command Thrust 4-Stroke?
Featured Inventory
View Details
26 Weldcraft 240 Cuddy King
Located Off Site, Fanny Bay BC
Fully rigged for exciting fishing experiences!
Featuring
• Espar D4 Diesel Heater
• Fishing Boat Accessories
• Upgraded with Galley & Dinette
Measurements
• Hull Length: 24 '
• Length over all - L.OA. w/ Bracket: 26 '
• Side Height: 40 "
• Beam: 102 "
• Deadrise: Bow 60 °
• Weight (Boat only, dry): approx. 4400 lbs
• Max HP Capacity: 450
• Aluminum Gauge Bottom: 0.250"
• Aluminum Gauge Sides: 0.160"
• Fuel Tank Cap: 130 USG
Colors
• Exterior Color: White Cabin and Half-side paint
• Interior Color: GreyStone Zolatone w/Clear Coat and Slate
Standard Features
• Full hardtop with forward leaning windows w/grab handles, Alaskan B/H, cabin lights, carpeted cabin sidewalls and 3 inch full length top grab rails.
• Diamond Sea Glaze glass package including slider side windows with screens, 8" rear bulkhead windows and lockable sliding bulkhead door.
• Cuddy cabin with DSG evacuation hatch and side windows, storage, cushions and 2 cabin lights.
• Swept bow with rails and self draining anchor rope locker
• Self bailing aft deck with .190 metal flooring and floor grip coating
• Offshore Bracket with Integral bottom sheet, and full width swim platform.
• Full reverse chine bottom design
• Extruded side / bottom chine with formed toe rail and keel strip
• Transom bait box w/split cutting board lid
• Aft sub-floor fish box w/self bailing lid
• Driver & Passenger pantograph wipers
• Mariner suspension seats w/swivels on aluminum riser boxes and foot rests
• 37 inch bench to bed storage seats
• Cabin sub-floor storage
• Hydraulic Steering
• Navigation lights & anchor lights
• Marine Horn
• Trim tab mounting brackets with electric trim tabs and zinc anodes
• Non skid deck & gunwale paint
• Sharkhide sides
• Vinyl side graphics
• Zolatone interior sidewalls & side storage trays with clearcoat
• Port console with storage
• Dual 1250 gph bilge pumps 1 with auto float switch
• SS below waterline through hull fittings
• Washdown kit and holder
• Dual battery isolator switch system
• Transom access panels
• Cup holders
• Dual side trays w/drains and rod racks
• H/D welded bow eye
• 2 welded stern eyes
• 7 - 8 inch welded cast cleats
• Fuel water separator
• Marine grade plywood floors with vinyl floor covering in cabin.
• Pressure tested sub-floor fuel cell
• Sound deadening foam package
• Gunwale side tray access step/seats with grab handles
View Details
225 HP Mercury 225XL V-6 4-Stroke DTS Cold Fusion
New 2021 Program
MSRP: $32,806.00 - Get 30% OFF MSRP / $9,847.00 OFF
Go with 5 Years Factory Backed Limited Coverage
Purchase this Mercury outboard model and get a total of 5 years of Mercury factory-backed limited coverage!
In addition to the standard 3-year warranty, you will also receive a 2-year Mercury Product Protection Gold plan!
ALL NEW V-6 3.4L 4-STROKE MODEL
INNOVATIVE FEATURES
START FASTER
The new Mercury FourStroke delivers incredible hole shot to get you moving faster and fishing sooner – and the thrill of having your hat blown off now and then.
Get on Plane Fast
At 3.4L, the new Mercury V-6 FourStroke boasts ample displacement in the 175-225hp range. Greater displacement means less work to produce more horsepower and torque, which results in greater acceleration.
Lightest Weight
Lower engine weight means higher power-to-weight ratio, enhanced performance, and better fuel efficiency.
Performance-inspired Configuration
The FourStroke’s four-valve, dual overhead cam design delivers greater acceleration.
Advanced Hydrodynamics
The FourStroke’s gearcase is designed to reduce drag and deliver more stable high-speed performance.
Optimized Mount Packages
Engine mount package is fine-tuned to achieve peak performance without sacrificing a smooth and quiet ride. Mercury engineers spent countless hours dampening sound and dialing in the configuration of the mount packages to create the optimal balance between performance and vibration.
LIGHT AND MIGHTY
Mercury FourStrokes provide premium power and torque in a lightweight package for better maneuverability, greater acceleration, and maximum exhilaration. And you'll love the fuel economy!
Lightest Weight
Every component has been engineered to meet stringent standards at the absolute minimum weight, making the 3.4L V-6 FourStroke the lightest outboard in its class by more than 10 pounds.
26-inch Mounting Centers
The FourStroke’s narrow, 64-degree bank angle and single-point cowl latch system enable tighter fit to the engine block. The extremely compact engine makes multi-engine installations feasible on a broader range of boats.
GO FARTHER
With superior “cruise” fuel economy, Mercury FourStroke engines take you farther, allow you to stay out longer, and have more fun on the water without spending a fortune on fuel. And isn't that what boating is all about?
Advanced Range Optimization (ARO) and closed-loop fuel control
Work together to adjust the fuel mixture and deliver the best possible fuel efficiency.
Advanced Lubrication System
Optimized bearing sizes and oil flows minimize friction and oil temperature to help the engine operate more efficiently.
Drive System
Optimized hydrodynamic shapes minimize drag and increase fuel economy.
Specifications:
• Shaft Length: 25in
• Starting: Smart Start Electric
• Controls: DTS Digital Throttle & Shift - DTS Compatible
• Power Trim & Tilt
• Fuel System: Electronic Fuel Injection (EFI)
• SmartCraft compatible
• Engine Type: V-6
• WOT RPM: 5200-6000
• Displacement: 209 CID (3.4L)
• Induction: 24-valves, DOHC
• Gear Ratio: 1.85:1
• Alternator: 85 amp (1071 watt)
• Dry Weight*: 475 lbs (215kg) *lightest available model
• Steering: Hydraulic (Standard base color), Power (options)
• Color options*: Phantom Black(current RPM Group model), Pearl Fusion White, Warm Fusion White, Cold Fusion White *White paint only available on 200 and 225 FourStroke models
RPM Group Re-Powering Services - contact us for a quote!
Professional Offshore Experiences also for private Customers:
You will benefit from our 20 years of re-powering experience on your boat - the same as we do for professional heavy users, such as Commercial Fishermen, Whale Watching Tour Operators, Fishing Charters and Sports Fishermen too - on extreme Vancouver Island Westcoast conditions – day by day!
Total Cost of Ownership (TCO) focused Re-Powering:
We design re-powering to accommodate your individual requirements while keeping the engine configurations sustainable, so that your engine RPM stays mainly in the middle range while retaining an excellent boat performance – with optimized configuration of HP, Propeller, Pitch to your boat measurements. This ensures the most economical operating cost for your individual boat specifications and style of boating.
General Services RPM Group:
• Pre Delivery Inspection - PDI
• Water Testing - 100% ready for operation
View Details
225HP Mercury 225XL V-6 4-Stroke
New 2021 Program
MSRP: $30,031.00 - Get 30% off MSRP / $9,012.00 OFF
Go with 5 Years Factory Backed Limited Coverage
Purchase this Mercury outboard model and get a total of 5 years of Mercury factory-backed limited coverage!
In addition to the standard 3-year warranty, you will also receive a 2-year Mercury Product Protection Gold plan!
ALL NEW V-6 3.4L 4-STROKE MODEL
INNOVATIVE FEATURES
START FASTER
The new Mercury FourStroke delivers incredible hole shot to get you moving faster and fishing sooner – and the thrill of having your hat blown off now and then.
Get on Plane Fast
At 3.4L, the new Mercury V-6 FourStroke boasts ample displacement in the 175-225hp range. Greater displacement means less work to produce more horsepower and torque, which results in greater acceleration.
Lightest Weight
Lower engine weight means higher power-to-weight ratio, enhanced performance, and better fuel efficiency.
Performance-inspired Configuration
The FourStroke’s four-valve, dual overhead cam design delivers greater acceleration.
Advanced Hydrodynamics
The FourStroke’s gearcase is designed to reduce drag and deliver more stable high-speed performance.
Optimized Mount Packages
Engine mount package is fine-tuned to achieve peak performance without sacrificing a smooth and quiet ride. Mercury engineers spent countless hours dampening sound and dialing in the configuration of the mount packages to create the optimal balance between performance and vibration.
LIGHT AND MIGHTY
Mercury FourStrokes provide premium power and torque in a lightweight package for better maneuverability, greater acceleration, and maximum exhilaration. And you'll love the fuel economy!
Lightest Weight
Every component has been engineered to meet stringent standards at the absolute minimum weight, making the 3.4L V-6 FourStroke the lightest outboard in its class by more than 10 pounds.
26-inch Mounting Centers
The FourStroke’s narrow, 64-degree bank angle and single-point cowl latch system enable tighter fit to the engine block. The extremely compact engine makes multi-engine installations feasible on a broader range of boats.
GO FARTHER
With superior “cruise” fuel economy, Mercury FourStroke engines take you farther, allow you to stay out longer, and have more fun on the water without spending a fortune on fuel. And isn't that what boating is all about?
Advanced Range Optimization (ARO) and closed-loop fuel control
Work together to adjust the fuel mixture and deliver the best possible fuel efficiency.
Advanced Lubrication System
Optimized bearing sizes and oil flows minimize friction and oil temperature to help the engine operate more efficiently.
Drive System
Optimized hydrodynamic shapes minimize drag and increase fuel economy.
Specifications:
• Shaft Length: 25in
• Starting: Smart Start Electric
• Controls: Remote Mechnical
• Power Trim & Tilt
• Fuel System: Electronic Fuel Injection (EFI)
• SmartCraft compatible
• Engine Type: V-6
• WOT RPM: 5200-6000
• Displacement: 209 CID (3.4L)
• Induction: 24-valves, DOHC
• Gear Ratio: 1.85:1
• Alternator: 85 amp (1071 watt)
• Dry Weight*: 475 lbs (215kg) *lightest available model
• Steering: Hydraulic (Standard base color), Power (options)
• Color options*: Phantom Black(current RPM Group model), Pearl Fusion White, Warm Fusion White, Cold Fusion White *White paint only available on 200 and 225 FourStroke models
RPM Group Re-Powering Services - contact us for a quote!
Professional Offshore Experiences also for private Customers:
You will benefit from our 20 years of re-powering experience on your boat - the same as we do for professional heavy users, such as Commercial Fishermen, Whale Watching Tour Operators, Fishing Charters and Sports Fishermen too - on extreme Vancouver Island Westcoast conditions – day by day!
Total Cost of Ownership (TCO) focused Re-Powering:
We design re-powering to accommodate your individual requirements while keeping the engine configurations sustainable, so that your engine RPM stays mainly in the middle range while retaining an excellent boat performance – with optimized configuration of HP, Propeller, Pitch to your boat measurements. This ensures the most economical operating cost for your individual boat specifications and style of boating.
General Services RPM Group:
• Pre Delivery Inspection - PDI
• Water Testing - 100% ready for operation
View Details
28 ft Rogue Boatworks Coastal Landing Craft 28
Rogue Boatworks Coastal Landingcraft 28
Key Features:
• Fully Welded Seams - No Stitch Welded Hull - 40% more Strength and Integrity
• Bottom, Support Girders, Sides & Transom - 5086 Marine Aluminum Alloy
• Powder Coated and Baked twice at 420° - 3 times more corrosion & impact resistant than painted boats
• Proven by Law Enforcement & Government Customers
4 Reasons why Rogue Jet Boats are more expensive & higher quality:
(1)The Impact of Fully Welded Seams in the Hull
There is no stitch welding in the hull all seams are fully welded resulting in about 25 to 30% more labour and 10 to 12 lbs more welding wire when welding the hull together.
Stitch/Skip welded boats loose 40% to 50% of their strength and integrity
Boats that run in rough seas with large or short interval waves are prone to cracking those stitch welds.
The open/not welded areas between the welds is where the flexing and cracking starts.
These areas are all hidden below the floor where most owners don't inspect with limited access, an area.
(2) Stronger Marine Alloy on all Parts
Rogue uses the more expensive, salt water corrosion resistant and 40% stronger 5086 Aluminum on the hull, sides, transom and box girders unlike other manufacturers who only use 5086 on the bottom and the cheaper/weaker 5052 on the sides, transom and box girders.
Rogue uses 1/4" and 3/8" plate in their transom and pod deck others use 1/8" and 3/16" at best.
(3) A Baked Finish - 3 times more resistent
The baked powder coat finish on a Rogue is 3 times more corrosion and impact resistant then painted boats and twice as durable.
The boat goes into the oven twice and gets the powder coat baked on and then a clear coat over top. The finish is the same under the gunnels, dash, seat boxes, fish and floor boxes as well as all visual areas on the top side of the boat.
(4) Less Maintenance Costs
The high durability of Rogue Boats in general, will keep your total cost of ownership low in the long term and the renewal of a 3M Heavy Duty Vinyl Wrap and not the decal material for the exterior sides, would cost you only 10% of a usual new painting.
The Coastal Outboard Series are designed to handle the rough stuff
Built extra deep and wide with extra freeboard , these outboard powered Deep Vees from Rogue have been designed for the roughest conditions on rivers, lakes, bays and the ocean.
Safety in high sides (36") and the extra wide bottom (78") for more stability makes the "Coastal" one of the safest and most seaworthy all welded aluminum boats in the industry.
The progressive deadrise of the boats bottom - from 50 degrees at the bow to 18 degrees at the transom - makes for a smooth ride in choppy seas.
Specifications:
• Hull Length: 28'
• Hull Length overall (Bracket and Transom included, without Outboard): tba
• Beam: 102"
• Side Height: 36"
• Bottom Width: 96"
• Deadrise: 18º transom/Bow 50º
• Fuel Capacity: 110 Gallon
• Hull Design: Progressive Dead Rise
• 5086 marine alloy sides and bottom
• 4 heavy duty lifting/turning strakes
• Side Thickness: 0.160"
• Bottom Thickness: 0.250"
• Transom Thickness: 0.250"
• Box Girder Thickness: 0.160"
Standard Features:
• Heavy duty .250" bottom and .250 transom
• Navigation Lights
• Dual Heavy Duty marine batteries + switch
• Extended outboard bracket-full width
• 2 Bilge Pumps and auto switches (1,100 gph)
• 12 volt Power Point
• Non slip grip steering wheel
• Transducer bracket
• Zinc anode at transom
View Details
23ft Thunder Jet 21 Chinook Hard Top
Clearance - Reg. 95,888.00 / You Save 8,889.00
Serious Fishing Boat
Everything about the Chinook has the serious fisherman in mind, from the extra deep sides to the extra rod trays and progressive deep “V” hull. This boat provides excellent security for friends and family with an extremely safe and stable platform. Add extra protection and style with any one of three hard top options.
Color: Navy Blue & Gray interior / Color matched Seating / Canvas Color - Dark Gray
Measurements
• Hull Length: 21'
• L.O.A.: 23'
• Beam Width: 96"
• Chine Width: 80"
• Side Height: 38"
• Transom Height / Motor Length: 25"
• Deadrise: Progresssive 18°
• Max HP Capacity: 250
• Fuel Capacity: 42 USG (Gallon)
• 5086 Aluminum Alloy Gauge Bottom: 0.190"
• 5052 Aluminum Alloy Gauge Sides: 0.125"
• 5052 Aluminum Alloy Gauge Transom: 0.250"
Standard Hull Features
• One Piece Hull Sides / One Piece Bottom
• Progressive Offshore Hullw/ Upswept Bow
• Full Length Engineered Box Stringers
• (4) Full Length Formed-In External Hull Stiffeners
• Exclusive Tri-Structure Full Length Reverse Chine
• (2) Performance Lifting Strakes
• Fully Welded Heavy-DutyKeel Guard
• Welded Thru-Hull Fittings
• (5) Welded 8" Cleats
• Wide Formed Gunnels
• Welded Heavy Duty Bow & Transom Eyes
• Welded 4” High Bow Rails
• Double Walled Self-Draining Diamond Tread Drop Bow
• Large Fully Welded Bow Drains
• Locking Self-Draining Bow Locker
• Welded Full Width Transom Platform w/ Undermount 3-Step Telescoping Ladder
• Welded External Motor Bracket
• Welded Downrigger Mounting Pads
• Locking Transom Fish Locker
• Transducer Mounting Bracket
• Welded 5 Piece Walk-Thru Windshield
Standard Interior Features
• (2) TJ Seats on Pedestals w/ Slide & Swivel
• (2) 39" Storage Box Bench Seats w/ Removable Backrests
• Heavy Duty Square Tube Folding 1/2 Top w/ Side Curtains
• Drop Curtain for 1/2 Top w/ Roll Up Center Door
• 1/2 Top Travel Boot
• Bulb Seal Along Forward Portions of AllCanvas
• Locking Glove Box w/ Radio Shelf
• Locking Under Dash Storage
• Stainless Steel Rubber Coated Steering Wheel
• Welded Passenger Grab Rail
• Welded High Mount Windshield Grab Rails
• Locking Floor Storage Compartment
• (3) Locking Interior Transom Access Hatches
• Diamond Tread Bow Step w/ Storage
• (4) Full Length Welded Side Storage Trays
• (8) Cup Holders
• Full Marine Carpeted Sound Dampening Side Walls
• Premium Marine Vinyl Decking
Standard Color & Graphics
• 1/3 Hull Side Paint
• Color Matched Painted Dash & Windshield
• Raised Domed Logos
Standard Rigging Features
• Analog Tachometer, Fuel, Trim & Hour Meter Dash Instrumentation
• Mechanical Throttle/Shift
• No Feedback Single Cable Steering System
• Premium Switch Panel
• Electric Horn
• 12V Power Point
• Premium Marine Wiring Harness w/ Water Tight Connections
• Safety Hub Power Distribution Block
• LED Navigation Lights Package
• Color Matched Under Dash & Transom Courtesy Lights
• Electric Bilge Pump w/ Auto Float Switch
• Conduit Under Bow Deck for Running Wiring
• Pantographic Self-Parking Driver Side Windshield Wiper
View Details
30ft Thunder Jet 28 Pilot
Clearance - Reg. 259,888.00 / You Save 15,889.00
Big Water Fishing Boat
Designed for rugged coastal water excursions, the Pilot caters to the adventurer in you without sacrificing style or comfort. Whether you’re enjoying a weekend away with the family or rigging in for serious offshore fishing, the Pilot delivers on design quality and function.
Color: Gloss Black / Stone Gray Seating / Canvas Color Dark Gray
Measurements
• Hull Length: 28'
• L.O.A.: 30'
• Beam Width: 108"
• Bottom Width: 90"
• Side Height: 40"
• Cabin Lengths: 116"
• Cockpit Lengths: 95"
• Transom Height / Motor Length: 25"
• Deadrise: 18°
• Max HP Capacity: 700
• Fuel Capacity: 110 USG (Gallon)
• 5086 Aluminum Alloy Gauge Bottom: 0.250"
• 5052 Aluminum Alloy Gauge Sides: 0.160"
• 5052 Aluminum Alloy Gauge Transom: 0.250"
Standard Hull Features
• Full Length Engineered Box Stringers
• (4) Full Length Formed-In External Hull Stiffeners
• Exclusive Tri-Structure Full Length Reverse Chine
• (4) Performance Lifting Strakes
• Fully Welded Heavy-Duty Keel Guard
• Welded Thru-Hull Fittings
• (7) Welded 8" Cleats
• Wide Formed Gunnels
• Welded Heavy Duty Bow & Transom Eyes
• Welded 1” Diameter 18" High Bow Rails
• Self-Bailing Vinyl Wrapped Aluminum Cockpit Flooring
• Upswept Bow
• Welded Bow Pulpit w/ Anchor Roller
• Self-Draining Anchor/Rope Locker w/ Exterior Hatch
• Welded Full Width Transom Platform w/ Undermount 3-Step Telescoping Ladder
• Welded Wrap-Around Stern Rails
• Welded Downrigger Mounting Pads
• Locking Transom Fish Locker
• Floor Fish Locker w/ Macerator Pump
• Locking Cockpit In-Floor Storage
• Starboard Transom Door
• Port Side Net Holder
• Welded Cabin w/ Bimini Top & 8 Rod Holders
• Diamond Sea Glaze Windows & Exterior Door
• 9 x 12 Trim Tabs
Standard Interior Features
• (2) Fully Adjustable Spring Ride Suspension Seats
• (2) Storage Box Bench Seats w/ Removable Backrests
• Locking Glove Box
• Stainless Steel Rubber Coated Steering Wheel
• Passenger Grab Rail
• Overhead Grab Rails
• (6) Cup Holders
• Full Marine Carpeted Sound Dampening Side Walls
• LED Red/White Dome & Strip Lights
• Upholstered Finished Cuddy Cabin w/ Cushions
• Offshore Deck Hatch w/ Screen
• V-berth Lights, Privacy Enclosure& Storage
• (2) Locking Interior Transom Access Hatches
• (4) Welded Cockpit Side Storage Trays
• LED Cockpit Flood Light
Standard Color & Graphics
• 1/3 Hull Side Paint
• 2-Tone Exterior Cabin Side Paint
• Painted Dash & Windshield
• Raised Domed Logos
• Flat Vinyl Model Designators
Standard Rigging Features
• Tachometer, Fuel, Trim & Hour Meter Dash Instrumentation
• Mechanical Throttle/Shift
• Hydraulic Steering w/ Tilt Helm
• Premium Switch Panel
• Electric Horn
• 12V Power Point
• Premium Marine Wiring Harness w/ Water Tight Connections
• Safety Hub Power Distribution Block
• Transom Battery Tray
• 4-Way Selector Battery Switch
• LED Navigation Lights Package
• Color Matched Under Dash & Transom Courtesy Lights
• (2) Electric Bilge Pump w/ Auto Float Switch
• (3) Pantographic Self-Parking Windshield Wipers
• Raw Water Washdown w/ Hose Receptacle
